For your best price or technical questions
PROFIBUS DP Series
Universal RS485/232 / PROFIBUS DP Gateway
GT200-DP-RS
909-490-7557
WhatsApp
WhatsApp
+1-909-490-7557
The GT200-DP-RS connects up to 32 Modbus RS-485/RS-232 serial devices to PLC and DCS control systems via a PROFIBUS DP interface. It supports Modbus RTU/ASCII protocols and functions as either a Modbus Master or Slave, enabling flexible and efficient system integration.
-
Technical Specification
-
Order Information
-
Download
-
Quick Start Guide
-
Selection Guide
-
Case Study
-
Related Products
-
Warranty & Service
Technical Specification:
- Acts as a PROFIBUS DP slave device, enabling connection between your devices and a PROFIBUS DP controller (Siemens S7-1500/1200/400/300 PLCs). Supports PROFIBUS DP V0/V1.
- Supports Modbus RTU/ASCII protocols in both Master and Slave modes.
- Serial: RS485, RS232, RS422, half-duplex.
- Serial Baud rate: 300, 600, 1200, 2400, 9600, 19.2 K, 38.4K, 57.6K and 115.2Kbps can be selected.
- Automatic baud rate detection (9600 bps to 12 Mbps) on the PROFIBUS DP interface.
- Serial port RS232/485 Selection via software.
- Supports transparent data transfer mode between PROFIBUS DP PLC and serial devices that does not support Modbus.
- Max Input: 244 bytes; Max Output: 244 bytes; Max Input+Output: 488 bytes.
- Power Supply: 24VDC (11V~30V), 80mA.
- Operating temperature:-20°C to 60°C (-4°F to 140°F).
- Rel. Humidity: 5%-95% RH (non-condensing).
- Dimension(W x H x D): 1in x 4in x 3.5in (25mm x 100mm x 90mm).
- Mounting: 35mm DIN rail.
- Protection rating: IP20.
| File | Type | Time | Download |
|---|
