Technical Specifications:

• The EtherNet/IP network is independent of the Modbus network.
• IEEE 802.u 10/100 Mbps Ethernet. Built-in Ethernet switch, supporting cascading network topologies.
• Supports static IP configuration and DHCP; automatically assigns a default IP address of 192.168.0.11 if DHCP times out.
• The serial port supports Modbus mode or transparent transmission, which is suitable for devices such as barcode scanners and RFID readers.
• Supports the standard ODVA EtherNet/IP communication protocol.
•  RS485 interface, half-duplex, Baud rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps; Parity: None, Odd, Even, Mark, Space; Stop bits: 1 or 2.
• The RS485 serial port supports built-in terminating, pull-up, and pull-down resistors.
• Acts as a Modbus Master on the Modbus network:
  • Supports function codes 01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H.
  • Each master can be configured with up to 100 Modbus commands.
  • Function codes 03H, 04H, 06H, 10H, and 17H support the "Byte Swap" feature, which helps resolve data formatting differences between the two networks.
• Maximum EtherNet/IP input and output data sizes:
  • Maximum input bytes: 492 bytes.
  • Maximum output bytes: 492 bytes.
• Power supply: 24 VDC (9 V to 30 V), 110 mA @ 24 VDC.
• Operating Temperature: -40°F to 158°F (-40°C to 70°C); Relative Humidity: 5% to 95% RH (non-condensing).
• Dimensions (W × H × D): 1 in × 4 in × 3.6 in (25 mm × 100 mm × 90 mm).
• Mounting: 35 mm DIN rail..