HART / EtherNet Gateway
GT200-HT-EI
The GT200-HT-EI gateway enables seamless connectivity between HART devices and EtherNet/IP or Modbus TCP networks, with support for a wide range of PLCs and controllers including Rockwell, Omron, and Schneider, etc. This gateway can function as a replacement for 1756/1769 AI/AO HART modules, allowing users to continue to have access to a wealth of valuable instrument information while helping reduce cable clutter in the process.
HART / EtherNet/IP Gateway
GT200-HT-EI V2.1
The GT200-HT-EI gateway enables seamless connectivity between HART devices and EtherNet/IP networks, with support for a wide range of PLCs and controllers including Rockwell, Omron, and ABB. This gateway can function as a replacement for 1756/1769 AI/AO HART modules, allowing users to continue to have access to a wealth of valuable instrument information while helping reduce cable clutter in the process.

HART / EtherNet Gateway

GT200-HT-EI
909-977-2988
WhatsApp

WhatsApp

+1-909-977-2988

The GT200-HT-EI gateway enables seamless connectivity between HART devices and EtherNet/IP or Modbus TCP networks, with support for a wide range of PLCs and controllers including Rockwell, Omron, and Schneider, etc. This gateway can function as a replacement for 1756/1769 AI/AO HART modules, allowing users to continue to have access to a wealth of valuable instrument information while helping reduce cable clutter in the process.

 Technical Specification:

 Provides the best integration between Rockwell Automation or Schneider PLCs and HART instruments.

  • Supports one HART channel.
    • HART can be used as a primary or secondary master.
  • The HART interface supports point-to-point mode and multidrop mode.
    • Under point-to-point mode, HART supports data burst operation.
  • Ethernet 10/100M adaptive. Supports IP address conflict detection.
  • Supports up to 127 commands. A HART output data buffer is up to 1000 bytes and a buffer of input data is up to 1600 bytes.
  • Supports an internal or external HART sampling resistor.
    • Supports at most 13 HART devices when using internal resistor (270Ω).
    • Supports at most 15 HART devices when using external resistor (250Ω).
  • Power supply: 24VDC (11V-30V), 90mA (24VDC).
  • Operating Temp: -30°F to 158°F (-30°C to 70°C); Rel. Humidity: 5% to 95% (non-condensing).
  • Dimension (W*H*D): 1 in*4 in*3.5 in (25mm*100mm*90mm).
  • Mounting: DIN Rail Mounting (35mm).
File Type Time Download